Split V-Ring

R6VE


Split V-Ring

Split dirt-exclusion seal.

The seal is stretched onto the shaft and rotates with the shaft and seals axially against the bearing side wall, housing, washer or even the heel of the pressure seal. The flexible sealing lip applies an axial force that reduces as the shaft RPM increases, leading to low friction and heat. Low contact force allows the seal to accommodate coaxial misalignment or runout. The R6VE is secured to the shaft by a clamping device and seals against the bearing face. It can be fitted in situations without disassembly of the equipment. The seal spins with the shaft and uses centrifugal force to create exclusion force. Small quantities are available in 1 to 3 days.




Operating Range
MaterialContinuous PressureTemperatureSurface Speed
N101No Pressure-13 to 212°F (-25 to 100°C)Up to 1,800 fpm (9m/s)
N102No Pressure-13 to 302°F (-25 to 150°C)Up to 2,800 fpm (14m/s)
V101No Pressure-4 to 392°F (-20 to 200°C)Up to 4,000 fpm (20m/s)

Seal Size Selector – Request a Quote

  • Enter shaft, rod or bore diameter
  • If recommended size is not feasible, please enter your preferred dimensions
  • If recommended size is not feasible, please enter your preferred dimensions
Back to Products page