Showing 205–216 of 326 results
-
Compare
S17CS17C
Premium High-Pressure Double-Lip Hydraulic Rod Seal
Eliminates seal extrusion in high-pressure systems with shock load and low pressure startup. Improved sealing performance and stability due to its secondary lip that retains lubrication between both dynamic seal lips, providing long service life.
Operating RangeMaterial Operating Pressure up to Maximum Pressure up to Temperature Surface Speed up to Fluid, Media
CompatabilityDuralast 4203 5,000psi (350bar) 10,000psi (700bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids Duralast 4403 8,000psi (520bar) 14,500psi (1000bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) same as Duralast 4203 Duralast 8166 3,800psi (260bar) 5,000psi (350bar) -4°F to 392°F (-20°C to 200°C) 3.2ft/s (1.0m/s) fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum Duralast 5101 3,800psi (260bar) 5,000psi (350bar) -22°F to 212°F (-30°C to 100°C) 1.6ft/s (0.5m/s) mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols Duralast 6146 3,800psi (260bar) 5,000psi (350bar) -30°F to 302°F (-35°C to 150°C) 2.0ft/s (0.7m/s) excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials. *Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com -
Compare S17C
S17C
Premium High-Pressure Double-Lip Hydraulic Rod Seal
Eliminates seal extrusion in high-pressure systems with shock load and low pressure startup. Improved sealing performance and stability due to its secondary lip that retains lubrication between both dynamic seal lips, providing long service life.
Operating RangeMaterial Operating Pressure up to Maximum Pressure up to Temperature Surface Speed up to Fluid, Media
CompatabilityDuralast 4203 5,000psi (350bar) 10,000psi (700bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids Duralast 4403 8,000psi (520bar) 14,500psi (1000bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) same as Duralast 4203 Duralast 8166 3,800psi (260bar) 5,000psi (350bar) -4°F to 392°F (-20°C to 200°C) 3.2ft/s (1.0m/s) fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum Duralast 5101 3,800psi (260bar) 5,000psi (350bar) -22°F to 212°F (-30°C to 100°C) 1.6ft/s (0.5m/s) mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols Duralast 6146 3,800psi (260bar) 5,000psi (350bar) -30°F to 302°F (-35°C to 150°C) 2.0ft/s (0.7m/s) excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials. *Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com -
Compare S17C
S17C
Premium High-Pressure Double-Lip Hydraulic Rod Seal
Eliminates seal extrusion in high-pressure systems with shock load and low pressure startup. Improved sealing performance and stability due to its secondary lip that retains lubrication between both dynamic seal lips, providing long service life.
Operating RangeMaterial Operating Pressure up to Maximum Pressure up to Temperature Surface Speed up to Fluid, Media
CompatabilityDuralast 4203 5,000psi (350bar) 10,000psi (700bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids Duralast 4403 8,000psi (520bar) 14,500psi (1000bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) same as Duralast 4203 Duralast 8166 3,800psi (260bar) 5,000psi (350bar) -4°F to 392°F (-20°C to 200°C) 3.2ft/s (1.0m/s) fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum Duralast 5101 3,800psi (260bar) 5,000psi (350bar) -22°F to 212°F (-30°C to 100°C) 1.6ft/s (0.5m/s) mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols Duralast 6146 3,800psi (260bar) 5,000psi (350bar) -30°F to 302°F (-35°C to 150°C) 2.0ft/s (0.7m/s) excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials. *Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com - Compare
- Compare
- Compare
- Compare
- Compare
- Compare
- Compare
- Compare
-
Compare
S2S2
Ultra-High Pressure Hydraulic Rod Seal
Non-symmetrical design with integrated positive actuated live trapezoidal back-up ring to eliminate seal extrusion in high-pressure systems with ultra-high pressure spikes. Reduced friction and wear provide a long service life.
Operating RangeMaterial Operating Pressure up to Maximum Pressure up to Temperature Surface Speed up to Fluid, Media
CompatabilityDuralast 4203 5,000psi (350bar) 10,000psi (700bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids Duralast 4403 8,000psi (520bar) 14,500psi (1000bar) -22°F to 260°F (-30°C to 125°C) 1.6ft/s (0.5m/s) same as Duralast 4203 Duralast 8166 3,800psi (260bar) 5,000psi (350bar) -4°F to 392°F (-20°C to 200°C) 3.2ft/s (1.0m/s) fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum Duralast 5101 3,800psi (260bar) 5,000psi (350bar) -22°F to 212°F (-30°C to 100°C) 1.6ft/s (0.5m/s) mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols Duralast 6146 3,800psi (260bar) 5,000psi (350bar) -30°F to 302°F (-35°C to 150°C) 2.0ft/s (0.7m/s) excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials. *Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com
