Shop Seals | Shop Seals by AHP Seals

VS-K19S

V-Spring Piston Seal with Scraper Lip

Piston seal for contaminated or abrasive dynamic sealing application. Scraper seal lip design on the external lip prevents particles from accumulating under the seal lip, reducing wear and extending life expectancy of the seal and its mating hardware surface.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Permachem xxxx	5,000psi (350bar) vacuum	10,000psi (700bar)	-328°F to 500°F (-200°C to 260°C)	33ft/s (10m/s)	Various material compound and spring combinations are available for aggressive chemicals, NACE service, chlorine service, cryogenic service, vacuum service, FDA (both contact and non-contact), fugitive emissions, as well as control fluids, hydraulic fluids, dry running in a wide range of gases
Material Permachem xxxx will be selected by AHPSeals to match your operating conditions.
*Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. For pressure above 3.000psi (210bar)or temperature above 200°F (95°C), please contact engineering for seal material and hardware specification.

Compare

VS-PRS19

Standard Symmetrical V-Spring Rod or Piston Seal

For use as either rod or piston seal in dynamic sealing application. Chamfered seal lips provide for easy installation and better lubrication in dynamic sealing applications, resulting in extended seal and mating surface hardware life.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Permachem xxxx	5,000psi (350bar) vacuum	10,000psi (700bar)	-328°F to 500°F (-200°C to 260°C)	33ft/s (10m/s)	Various material compound and spring combinations are available for aggressive chemicals, NACE service, chlorine service, cryogenic service, vacuum service, FDA (both contact and non-contact), fugitive emissions, as well as control fluids, hydraulic fluids, dry running in a wide range of gases
Material Permachem xxxx will be selected by AHPSeals to match your operating conditions.
*Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. For pressure above 3.000psi (210bar)or temperature above 200°F (95°C), please contact engineering for seal material and hardware specification.

Compare

VS-PRS19

Standard Symmetrical V-Spring Rod or Piston Seal

For use as either rod or piston seal in dynamic sealing application. Chamfered seal lips provide for easy installation and better lubrication in dynamic sealing applications, resulting in extended seal and mating surface hardware life.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Permachem xxxx	5,000psi (350bar) vacuum	10,000psi (700bar)	-328°F to 500°F (-200°C to 260°C)	33ft/s (10m/s)	Various material compound and spring combinations are available for aggressive chemicals, NACE service, chlorine service, cryogenic service, vacuum service, FDA (both contact and non-contact), fugitive emissions, as well as control fluids, hydraulic fluids, dry running in a wide range of gases
Material Permachem xxxx will be selected by AHPSeals to match your operating conditions.
*Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. For pressure above 3.000psi (210bar)or temperature above 200°F (95°C), please contact engineering for seal material and hardware specification.

Compare

VS-PRS19S

Scraper Lip V-Spring Rod or Piston Seal

For use as either rod or piston seal in contaminated or abrasive dynamic sealing application. Scraper seal lip design on internal and external lips prevents particles from accumulating under the lip, reducing wear and extending life expectancy of the seal and its mating hardware surface.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Permachem xxxx	5,000psi (350bar) vacuum	10,000psi (700bar)	-328°F to 500°F (-200°C to 260°C)	33ft/s (10m/s)	Various material compound and spring combinations are available for aggressive chemicals, NACE service, chlorine service, cryogenic service, vacuum service, FDA (both contact and non-contact), fugitive emissions, as well as control fluids, hydraulic fluids, dry running in a wide range of gases
Material Permachem xxxx will be selected by AHPSeals to match your operating conditions.
*Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. For pressure above 3.000psi (210bar)or temperature above 200°F (95°C), please contact engineering for seal material and hardware specification.

Compare

VS-PS19A

Flanged V-Spring-loaded high-pressure rotary seal for spinning bore.

Designed to provide long service life and low friction for extreme service applications over a wide temperature range.

This seal style is able to operate efficiently in environments where the operating parameters vary over a wide range. Cycling of pressure, speed or temperature can all be accommodated, as can mechanical torsion due to changes in movement type or direction. The seal is clamped on the flanged heel, preventing it from rotating and forming a positive static seal area. Also available in small quantities for repairs and seal replacement in 1 to 3 days.

Operating Range

Material	Continuous Pressure	Max.Pressure Spike	Temperature	Surface Speed	Application	Dry-run	PV-Rating
Permachem 6233	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	standard oil lubrication, high waterbased fluids	YES	9
Permachem 6235	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	Soft shaft material, gaseous media, FDA compliant	YES	9
Duraloy 4736	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	low wear and abrasion, long service life	YES	9

Compare

VS-PS19A

Flanged V-Spring-loaded high-pressure rotary seal for spinning bore.

Designed to provide long service life and low friction for extreme service applications over a wide temperature range.

This seal style is able to operate efficiently in environments where the operating parameters vary over a wide range. Cycling of pressure, speed or temperature can all be accommodated, as can mechanical torsion due to changes in movement type or direction. The seal is clamped on the flanged heel, preventing it from rotating and forming a positive static seal area. Also available in small quantities for repairs and seal replacement in 1 to 3 days.

Operating Range

Material	Continuous Pressure	Max.Pressure Spike	Temperature	Surface Speed	Application	Dry-run	PV-Rating
Permachem 6233	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	standard oil lubrication, high waterbased fluids	YES	9
Permachem 6235	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	Soft shaft material, gaseous media, FDA compliant	YES	9
Duraloy 4736	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	low wear and abrasion, long service life	YES	9

Compare

VS-PS19A

Flanged V-Spring-loaded high-pressure rotary seal for spinning bore.

Designed to provide long service life and low friction for extreme service applications over a wide temperature range.

This seal style is able to operate efficiently in environments where the operating parameters vary over a wide range. Cycling of pressure, speed or temperature can all be accommodated, as can mechanical torsion due to changes in movement type or direction. The seal is clamped on the flanged heel, preventing it from rotating and forming a positive static seal area. Also available in small quantities for repairs and seal replacement in 1 to 3 days.

Operating Range

Material	Continuous Pressure	Max.Pressure Spike	Temperature	Surface Speed	Application	Dry-run	PV-Rating
Permachem 6233	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	standard oil lubrication, high waterbased fluids	YES	9
Permachem 6235	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	Soft shaft material, gaseous media, FDA compliant	YES	9
Duraloy 4736	3,000psi (210bar)	3,500psi (240bar)	-80 to 400°F (-60 to 200°C)	Up to 1,200 fpm (6m/s)	low wear and abrasion, long service life	YES	9

Compare

VS-K19HP1

VS-K19S

VS-PRS19

VS-PRS19

VS-PRS19DS

VS-PRS19HP

VS-PRS19HP2

VS-PRS19M

VS-PRS19S

VS-PS19A

VS-PS19A

VS-PS19A

CONTACT US EXPRESS