Shop Seals | Shop Seals by AHP Seals

Showing 181–192 of 326 results

Split V-Ring

Split dirt-exclusion seal.

The seal is stretched onto the shaft and rotates with the shaft and seals axially against the bearing side wall, housing, washer or even the heel of the pressure seal. The flexible sealing lip applies an axial force that reduces as the shaft RPM increases, leading to low friction and heat. Low contact force allows the seal to accommodate coaxial misalignment or runout. The R6VE is secured to the shaft by a clamping device and seals against the bearing face. It can be fitted in situations without disassembly of the equipment. The seal spins with the shaft and uses centrifugal force to create exclusion force. Small quantities are…

Operating Range

Material	Continuous Pressure	Temperature	Surface Speed
N101	No Pressure	-13 to 212°F (-25 to 100°C)	Up to 1,800 fpm (9m/s)
N102	No Pressure	-13 to 302°F (-25 to 150°C)	Up to 2,800 fpm (14m/s)
V101	No Pressure	-4 to 392°F (-20 to 200°C)	Up to 4,000 fpm (20m/s)

Compare

R7VS

Heavy-duty V-Ring

Heavy-duty dirt-exclusion seal.

The seal is stretched onto the shaft and rotates with the shaft and seals axially against the bearing side wall, housing, washer or even the heel of the pressure seal. The flexible sealing lip applies an axial force that reduces as the shaft RPM increases, leading to low friction and heat. Low contact force allows the seal to accommodate coaxial misalignment or runout. It has a wider and tapered body that provides greater clamping force for the v-ring, allowing use in heavily contaminated environments. Small quantities are available in 1 to 3 days.

Operating Range

Material	Continuous Pressure	Temperature	Surface Speed
N101	No Pressure	-13 to 212°F (-25 to 100°C)	Up to 1,800 fpm (9m/s)
N102	No Pressure	-13 to 302°F (-25 to 150°C)	Up to 2,800 fpm (14m/s)
V101	No Pressure	-4 to 392°F (-20 to 200°C)	Up to 4,000 fpm (20m/s)

Compare

R8

Small axial height bearing grease seal

A non-metal seal designed to control leakage in grease-packed bearings.

The springless lip imparts low friction and heat generation. The elastomer outer diameter creates excellent static sealing and compensates for thermal cycling. The small footprint of this seal allows it to be fitted in closed grooves. This style is available in a wide range of elastomers and small quantities for repairs and seal replacement and can be shipped in 1 to 3 days.

Operating Range

Material	Continuous Pressure	Temperature	Surface Speed
N101	No Pressure	-13 to 212°F (-25 to 100°C)	Up to 2,400 fpm (12m/s)
N102	No Pressure	-13 to 302°F (-25 to 150°C)	Up to 4,000 fpm (20m/s)
V101	No Pressure	-4 to 392°F (-20 to 200°C)	Up to 6,000 fpm (30m/s)

Compare

R8C

Bearing grease seal for open housings

A non-metal seal designed to control leakage in grease-packed bearings.

The springless lip imparts low friction and heat generation. The thermoplastic outer diameter creates excellent static sealing and compensates for thermal cycling. The stiffness of the thermoplastic outer diameter of this seal allows it to be fitted in open housings. This style is available in a wide range of elastomers and small quantities for repairs and seal replacement and can be shipped in 1 to 3 days.

Operating Range

Material	Continuous Pressure	Temperature	Surface Speed
N101	No Pressure	-13 to 212°F (-25 to 100°C)	Up to 2,400 fpm (12m/s)
N102	No Pressure	-13 to 302°F (-25 to 150°C)	Up to 4,000 fpm (20m/s)
V101	No Pressure	-4 to 392°F (-20 to 200°C)	Up to 6,000 fpm (30m/s)

Compare

R9

Spring-loaded, single-lip oil seal

Single-lip oil seal with a solid rubber construction. Designed to allow fitment in challenging locations.

The optimized seal lip design uses a garter spring to maintain a constant radial lip load, thus ensuring optimum sealability. The solid rubber design allows the seal to snap into a closed groove; alternatively, a retainer ring can be used to hold the seal in place for open groove installation. Fitment in many challenging seal locations is possible with this design. This style is available in a wide range of elastomers and small quantities for repairs and seal replacement and can be shipped in 1 to 3 days. For dirty, dusty or polluted…

Operating Range

Material	Continuous Pressure	Max.Pressure Spike	Temperature	Surface Speed
N101	3psi (0.2bar)	7psi (0.5bar)	-13 to 212°F (-25 to 100°C)	Up to 2,400 fpm (12m/s)
N102	3psi (0.2bar)	7psi (0.5bar)	-13 to 302°F (-25 to 150°C)	Up to 4,000 fpm (20m/s)
V101	3psi (0.2bar)	7psi (0.5bar)	-4 to 392°F (-20 to 200°C)	Up to 6,000 fpm (30m/s)

Compare

R9HDS

Single-lip medium-duty oil seal

Single-lip medium-duty oil seal for fitment in an open groove.

Medium-duty oil seal for use in an open housing, even where exceptionally large cross sections are required. Available in many case and lip materials, this seal can handle aggressive conditions and even pressurized chemicals. This non-metal reinforcement design ensures concentric fitment and increased corrosion resistance over traditional seals. This seal is available in small quantities for repairs and seal replacements within 1 to 3 days. For dirty, dusty or polluted environments, our R10HDS style with additional dust lip should be used.

Operating Range

Material	Continuous Pressure	Max.Pressure Spike	Temperature	Surface Speed
N101	3psi (0.2bar)	7psi (0.5bar)	-13 to 212°F (-25 to 100°C)	Up to 2,400 fpm (12m/s)
N102	3psi (0.2bar)	7psi (0.5bar)	-13 to 302°F (-25 to 150°C)	Up to 4,000 fpm (20m/s)
V101	3psi (0.2bar)	7psi (0.5bar)	-4 to 392°F (-20 to 200°C)	Up to 6,000 fpm (30m/s)

Compare

R9S

Split, single-lip oil seal

Split single-lip oil seal with a solid rubber construction.

The optimized seal lip design uses a garter spring to maintain a constant radial lip load, thus ensuring optimum sealability. Seal is split for easy on-site installation with a minimum of equipment dismantling. Normally, R9 is used for original equipment build and R9S for onsite replacement.

This style is available in a wide range of elastomers and small quantities for repairs and seal replacement and can be shipped in 1 to 3 days. For dirty, dusty or polluted environments, our R9S style with additional dust lip should be used.

Operating Range

Material	Continuous Pressure	Temperature	Surface Speed
N101	No Pressure	-13 to 212°F (-25 to 100°C)	Up to 2,400 fpm (12m/s)
N102	No Pressure	-13 to 302°F (-25 to 150°C)	Up to 4,000 fpm (20m/s)
V101	No Pressure	-4 to 392°F (-20 to 200°C)	Up to 6,000 fpm (30m/s)

Compare

RLS

Heavy-duty single-lip oil seal

Heavy-duty single-lip rotary shaft seal design for use in harsh and severe environments and shock loads.

Designed to handle harsh or arduous conditions where most seals have a short life. This style has higher shaft run-out and misalignment than traditional oil seals. Available in many metal and lip materials, this seal can handle high speed runout or pressurized chemicals. It utilizes press-in fitment for open seal housing. This seal design eliminates spring dumping, and provides protection for the sealing lip during installation. It can be retrofitted to replace standard seals.

Operating Range

Material	Continuous Pressure	Max.Pressure Spike	Temperature	Surface Speed
N101	3psi (0.2bar)	7psi (0.5bar)	-13 to 212°F (-25 to 100°C)	Up to 1,800 fpm (9m/s)
N102	3psi (0.2bar)	7psi (0.5bar)	-13 to 302°F (-25 to 150°C)	Up to 2,800 fpm (14m/s)
V101	3psi (0.2bar)	7psi (0.5bar)	-4 to 392°F (-20 to 200°C)	Up to 4,000 fpm (20m/s)

Compare

S1

Long-Life Hydraulic Rod Seal

Non-symmetrical design to provide the longest service life in medium-to high-pressure hydraulic rod sealing applications. Beveled lip for maximum fluid sealing ability. Economical hydraulic rod seal.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Duralast 4203	3,800psi (260bar)	5,000psi (350bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids
Duralast 4403	5,000psi (350bar)	8,000psi (520bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	same as Duralast 4203
Duralast 8166	2,300psi (160bar)	3,800psi (260bar)	-4°F to 392°F (-20°C to 200°C)	3.2ft/s (1.0m/s)	fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum
Duralast 5101	2,300psi (160bar)	3,800psi (260bar)	-22°F to 212°F (-30°C to 100°C)	1.6ft/s (0.5m/s)	mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols
Duralast 6146	2,300psi (160bar)	3,800psi (260bar)	-30°F to 302°F (-35°C to 150°C)	2.0ft/s (0.7m/s)	excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents
Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials.
Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com

Compare

S1

Long-Life Hydraulic Rod Seal

Non-symmetrical design to provide the longest service life in medium-to high-pressure hydraulic rod sealing applications. Beveled lip for maximum fluid sealing ability. Economical hydraulic rod seal.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Duralast 4203	3,800psi (260bar)	5,000psi (350bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids
Duralast 4403	5,000psi (350bar)	8,000psi (520bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	same as Duralast 4203
Duralast 8166	2,300psi (160bar)	3,800psi (260bar)	-4°F to 392°F (-20°C to 200°C)	3.2ft/s (1.0m/s)	fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum
Duralast 5101	2,300psi (160bar)	3,800psi (260bar)	-22°F to 212°F (-30°C to 100°C)	1.6ft/s (0.5m/s)	mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols
Duralast 6146	2,300psi (160bar)	3,800psi (260bar)	-30°F to 302°F (-35°C to 150°C)	2.0ft/s (0.7m/s)	excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents
Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials.
Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com

Compare

S1

Long-Life Hydraulic Rod Seal

Non-symmetrical design to provide the longest service life in medium-to high-pressure hydraulic rod sealing applications. Beveled lip for maximum fluid sealing ability. Economical hydraulic rod seal.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Duralast 4203	3,800psi (260bar)	5,000psi (350bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids
Duralast 4403	5,000psi (350bar)	8,000psi (520bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	same as Duralast 4203
Duralast 8166	2,300psi (160bar)	3,800psi (260bar)	-4°F to 392°F (-20°C to 200°C)	3.2ft/s (1.0m/s)	fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum
Duralast 5101	2,300psi (160bar)	3,800psi (260bar)	-22°F to 212°F (-30°C to 100°C)	1.6ft/s (0.5m/s)	mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols
Duralast 6146	2,300psi (160bar)	3,800psi (260bar)	-30°F to 302°F (-35°C to 150°C)	2.0ft/s (0.7m/s)	excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents
Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials.
Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com

Compare

S1012

Premium Pre-Energized Long-Life Vee-Packing

Premium Vee-packing that does not require the tightening of the gland to maintain a positive seal due to the pre-energized design and material of the Vee-rings, leading to 3 to 4 times the service life over traditional rubber fabric Vee-packing. Retro fits seals of similar design.

Operating Range

Material	Operating Pressure up to	Maximum Pressure up to	Temperature	Surface Speed up to	Fluid, Media Compatability
Duralast 4203	5,000psi (350bar)	10,000psi (700bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	mineral oil-based fluids, fire-resistant water-based hydraulic fluids including HFA and HFB, sea water, biodegradable fluids, vegetable oils, bio-diesels, and most modern hydraulic fluids
Duralast 4403	8,000psi (520bar)	14,500psi (1000bar)	-22°F to 260°F (-30°C to 125°C)	1.6ft/s (0.5m/s)	same as Duralast 4203
Duralast 8166	3,800psi (260bar)	5,000psi (350bar)	-4°F to 392°F (-20°C to 200°C)	3.2ft/s (1.0m/s)	fire-resistant fluids, phosphate esters, mineral oils, greases, and most inorganic acids and chemicals, gasoline and gasoline/alcohol blends, hard vacuum
Duralast 5101	3,800psi (260bar)	5,000psi (350bar)	-22°F to 212°F (-30°C to 100°C)	1.6ft/s (0.5m/s)	mineral-oil based hydraulic fluids, silicone greases, petroleum-based oils, water and alcohols
Duralast 6146	3,800psi (260bar)	5,000psi (350bar)	-30°F to 302°F (-35°C to 150°C)	2.0ft/s (0.7m/s)	excellent heat and oil resistance, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents
Additional standard materials available: High-performance polyurethanes, NBR (Nitrile), FKM, Viton®, HNBR, EPDM, Aflas®, Hytrel®, Silicone, low- and high-temperature, FDA-compliant seal material grades, PTFE, filled PTFE®, engineered thermoplastics and proprietary specialized Duralast™, Duraloy™, and Permachem™ materials.
*Important Note: Maximum values above depend on extrusion gap, clearances, seal material, media, temperatures, pressures, surface speed, dynamic running surface finish and working environment. Seals cannot be operated at their upper ratings at the same time. Pressure ratings can be increased by reducing clearances. For pressure above specified operating pressure, please contact engineering@ahpseals.com

Compare

R6VE

R7VS

R8

R8C

R9

R9HDS

R9S

RLS

S1

S1

S1

S1012

CONTACT US EXPRESS